| C-15 |
Cutting
Workboard with a blue C-19 Pad and (2) F-11 Ferrules on
hardboard.
The 18" x 18" x
9/16" thick cutting workboard provides precise, perpendicular
pivoting action and has been specially engineered for extended
use. The cutting workboard contains dual ferrules to
increase gasket cutting capabilities from 18" (at center
pivot) to 36" (at corner pivot) while ensuring perfectly
round gaskets. |
| C-19 |
Molded
Blue Plastic Cutting Pad (18" x 18" x 3/16"
thick). The molded blue plastic
cutting pad, embossed with a non-slip surface, is compounded to
"re-seal" itself, reduce blade friction, breakage, and
dulling. |
| E-12 |
Extension
Arm
Each nickle-chromed extension
arm adds 12" to cutting capacity. Combining multiple
arms allows for nearly unlimited cutting capacities. |
| K-32 |
Kit of
(6) F-11 Center Ferrules |
| K-24 |
Kit of
(6) Pivot Pins: 2 each of
P-8, P-9, and P-10 |
| K-26 |
Kit of
(6) Pivot Pins: 3 each of
P-8 and P-9 |
| P-86 |
Kit of
(6) P-8 Short Pivot Pins |
| P-96 |
Kit of
(6) P-9 Long Pivot Pins |
| P-106 |
Kit of
(6) P-10 Extra Long Pivot Pins |
| P-116 |
Kit of
(6) P-11 Disk Pivot Pins |
| K-7 |
Complete
Kit of 6 Parts: 1 each of
B-17, F-11, P-8, P-9, P-10 and P-11 |
| K-14 |
Kit of
(6) Cutting Blades: 3 each
of B-17 and B-25 |
| B-176 |
Kit of
(6) B-17 Thin Cutting Blades |
| B-256 |
Kit of
(6) B-25 Thick Cutting Blades |
| L-37 |
Bolt
Hole Locator
Locates center point of any
size bolt hole regardless of number or size |
| D-47 |
Dove-Tail
Designer
Cut and dove-tail gasket
material together |
| K-48 |
Pivot
Post Assembly (N-4, 2 W-5,
S-3, Q-6)
Fits 777A, HD747-A, 747C and 748 E-25 |
| L-111 |
Easy
Cutting Lubricant
Greatly reduces blade friction
on the material to make cutting any gasket material easier.
L-111 is practically a necessity for cutting thick or soft
materials (50 Duro and lower) and sponge. Blades will stay sharp
longer by reducing friction. One 16 oz. Bottle and Mixer
Applicator will last a long time, as the Concentrate mixes with
ordinary tap water. |
| T-1 |
Pad-Installing
Tape (108 ft. roll) |
| H-27 |
Pin
Handle
Spring-loaded for effortless
pivot pin insertion in material. |
| B-86 |
Kit of
(6) B-8 Super Cutting Blades
For use with previous model
gasket cutters ONLY |
| S-86 |
Kit of
(6) S-8 Thin Cutting Blades
For use with previous model
gasket cutters ONLY |
